CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair
(34 reviews)
Price: $10.40
In Stock
CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair
Item # CE10211G
Retail:$99.99
Our Price: $10.40
You Save: 90%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (34)
- Q & A (0)
- Videos (1)
- Photos
CE Smith Boat Trailer Parts - CE10211G
- Rollers
- Side Angle Bracket
- Galvanized Steel
- CE Smith
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.
Features:
- L-shape brackets accommodate a variety of different roller lengths
- Mount to your boat trailer's frame or tongue
- Sturdy, 7-gauge galvanized steel construction resists corrosion
- Made in the USA
Specs:
- Application: 4", 5", 8", 10", 12" and 18" long rollers that take a 1/2" diameter shaft
- Diameter of mounting holes (each): 3/8"
- Quantity: 1 pair
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
10211G 7-Gauge Galvanized Steel Side Angle Replacement Mounting Brackets by CE Smith - QTY 2
California residents: click here
Video of CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of CE Smith Boat Trailer Parts - Galvanized Angle Bracket Boat Trailer Roller - CE10211G
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at the CE Smith galvanized steel, side angle mounting brackets for boat trailer rollers. Now, this pair of L-shaped brackets make it simple to mount a roller precisely where you need it on your boat trailer. These L-shaped brackets accommodate a variety of different roller lengths, such as four inches, five inches, eight inches, 10 inches, 12 inches, and 18 inch long rollers that take a half inch diameter shaft. These mount to your boat trailer's frame or tongue.
And they are made in the USA of sturdy, seven-gauge galvanized steel construction that's gonna resist rust and corrosion. Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically three millimeters to five millimeters thick. And this thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding. Let me pull out my ruler here and just give you some overall measurements.
I'm gonna be measuring the inside length of the longer side of this bracket first. So, I put my ruler up there and it looks like we're sitting at about 2 1/2 inches long. And that width, we are sitting at an inch and a half. And then the inside length on the shorter part of this bracket, we are sitting right at an inch and a half. And again, the width is going to be the same as well by inch and a half.
The diameter of these holes are 3/8 of an inch. And you will receive one pair of these brackets. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair - CE10211G
Average Customer Rating: 4.9 out of 5 stars (34 Customer Reviews)
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.by: Matt04/13/2024
Good service, quick delivery. The parts I've ordered have always been exactly as described.
by: Vicki J.08/17/2016
These are perfect for a 1/2" shaft. Put them on a home built trailer for a kayak and my husband is over thr moon! Very sturdy and fits perfectly with both 2
5# or 3" roller!
by: Keith Parker08/29/2015
Got my package in 2 days! Just what I ordered . Good quality products. Will definitely use for all my trailer parts. Good selection to choose from.
Keith P.
8/28/2016
Still holding up
by: Brad K.09/21/2017
Upon placing an order i had not received tracking number of shipment and called to see where order was after 7 days. While there was some confusion they found the problem that supplier was no longer making a stainless light bracket and originally said they were 2 more weeks out on getting the powder coated ones. 3 days later may shipment was received in full with everything. Even though there was an error in the order at least you could contact someone and get immediate assistance. This will be my first choice for parts as they have given great service on all my previous orders as well. Keep up the great service hard to find these days.
by: Richard B10/17/2014
I purchased these two bracket sets for a purpose other than what they are intended for. Nevertheless, I am very pleased with the strength and galvanize finish on them. Items were delivered in short order and I have already used them for my own special application. I am very please with your products and service.
by: Richard C11/25/2019
Great service, Very good prices. And fast shipping. I would highly recommend etrailer to anyone.
by: David11/14/2016
Received my parts on time and well packaged. I'm building a kayak trailer and etrailer has everything I need for the job! Thanks etrailer!
by: Carlos02/25/2018
Solid and sturdy (steel) brackets. Dimensions described fit my needs for securing items to a floor.
by: mr wonderful01/10/2014
I have always been pleased with the quality and service provided by etrailer. For many years, I have purchased all of my trailer needs from them.
by: Bard05/19/2015
I used them for something a little different, and so far so good, tough and sturdy , awesome product at a great price.
by: Bill O.05/20/2013
These were overkill for my project, but they are excellent for their intended purpose. The galvanizing is excellent and they are thicker that they appear in the picture - very sturdy.
by: Sam 08/02/2022
They are just what I was looking for and they came very quickly
by: Jim06/08/2016
Well made. Rugged, effective.
by: Andrew10/09/2018
Worked great, galv holding up nicely.
by: Cory 05/26/2017
Not much to say just as described
by: Rick12/14/2018
Work great, exactly as described.
by: Jeff P.04/20/2015
Product was sturdy and good quality, primed and put on before I could take a picture.
by: Susie 01/14/2022
Just what we needed and the response and quickness of shipping was great! The price was reasonable and shipping was also reasonable. Thank you.
by: Ronald 07/08/2021
Delivered in a timely manner and exactly what I ordered
by: W10/06/2021
Excellent fabrication and galvanizing. Fast shipping, correct order.
by: Phil L. Ontario, N.Y04/27/2013
Items just as described. I put them into service the next day, with no glitches
by: Darryl01/23/2024
by: Daniel C03/09/2017
always great to deal with this is one company that doesn't disappoint . If you need something they are here for you
by: Roller bracket 10/05/2016
Excellent service and price beats Western Marine by 50% cheaper
by: My Info03/29/2014
Great service selection and packaging
25
34
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Recommended Bracket and Roller Shaft For Yates Side Guide Roller 12 Inches LongThe Yates Side Guide Roller for Boat Trailers - Heavy-Duty Rubber - 12" Long - 1/2" Shaft # YR12243-4P is compatible with the CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair # CE10211G. Then you may be able to use the Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 12-3/4" x 1/2" # CE10705A although it doesn't give much space. A better option is to use the Yates Side Guide Roller for Boat Trailers - Heavy-Duty Rubber...
view full answer... - Replacement Keel Roller Brackets for a Tee Nee Boat Trailer with 3 Inch RollersThe 3 inch rubber bow roller, # YR3143-4, that you referenced is typically used at the front of the boat near the winch. The rollers that are usually used in the middle and rear are keel rollers. Often times, the v shape of the 3 inch bow roller is too deep for the middle or rear end of a boat hull. I did some research on your Tee Nee trailer and it looks like there are a few different styles that will affect the type of brackets that you will use. If you have frame rails that run perpendicular...
view full answer... - Bracket Dimensions for the CE Smith Side Angle Mounting Brackets # CE10211G I went out into our warehouse and pulled a CE Smith Side Angle Mounting Brackets # CE10211G to get some measurements for you. Check out the picture I attached to see them all.
view full answer...
- What is Diameter is the Center Hole for Yates Boat Trailer Roller # YR4163-4PYes the Yates roller, # YR4163-4P, does indeed have an approximate 1/2 inch diameter center hole for use with a 1/2 inch shaft. You mentioned that you have a shaft already but if you determine you need a new one use # CE10700A which also comes with new pal nuts. If you determine you also need mounting brackets you can use # CE10211G or # CE10300G.
view full answer... - Mounting Hole Distance to Bottom of Bracket on CE Smith Side Angle Mounting Brackets # CE10211GThe center of the holes on the CE Smith Side Angle Mounting Brackets # CE10211G that you referenced are 2-1/4 inches above the mounting surface. Since the diameter of the roller gets split on either side of it a 4 inch diameter roller would be about as big as I'd recommend.
view full answer...
- Is Boat Trailer Roller Bracket Available For Rollers That Use 5/8 Inch ShaftThe Side Angle Mounting Brackets for Boat Trailer Rollers, part # CE10211G, you referenced have a 3/8 inch hole used for attaching boat trailer roller shafts. Drilling the hole out on this bracket could compromise the integrity of the bracket and would not be recommended. We do have brackets that may work for you if you have the mounting space available. They are part # CE10500G. The mounting slots on these brackets are 1/2 in wide x 5 in tall.
view full answer... - Can Hole be Enlarged on CE Smith Boat Trailer Roller Brackets for a 5/8 Inch Diameter ShaftGenerally speaking, it is not recommended to bore out the holes on the roller brackets # CE10211G because doing so could weaken the brackets. Adjustable mounting bracket # CE32004G would be a much better option. We also have # MBSPB as a possible option.
view full answer... - Can the CE Smith Mounting Brackets for Boat Trailer Rollers # CE10211G be Used with 12 Inch RollerThe CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers # CE10211G that you referenced is designed to be used on rollers designed for 1/2 inch diameter shafts. I did a little searching and it looks like the Stoltz is designed for a 5/8 inch shaft. You could use a 1/2 shaft with that roller though and it would be compatible with the # CE10211G. For a similar 12 inch roller that we carry you could get the Boat Trailer 12 inch Long Keel Roller # DL21728.
view full answer... - 1983 Tee Nee Trailer for a Flying Scot Sailboat Keel Roller OptionFrom past customers we have found that the TeeNee trailers use a three inch keel roller like the part # YR300Y. That being said I would need to see a picture of your setup to give you the best options we have. I did some research on your Tee Nee trailer and it looks like there are a few different styles that will affect the type of brackets that you will use. If you have frame rails that run perpendicular to the boat, then I recommend using a set of angle mounting brackets like part...
view full answer... - Roller Recommendation for Guiding a 2 inch Wide Strap on Boat TrailerThe best roller for your needs would be the # YR5203-4P this has an overall length of 5 inches so it would work well for a 2 inch wide strap to roll on the inner part of it. The overall diameter of the roller is 3 inches which is pretty close to what you need. It's designed to roll on a 1/2 inch shaft like part # CE10701A. For a bracket you could use the panel bracket part # CE10301G or the angle brackets part # CE10211G. Check out the review video I attached.
view full answer... - Can the Yates Rubber Y-Style Bow Stop fit in a CE Smith Panel BracketThe Yates bow stop # YR4Y22-3 has a base that is 2 inches x 2 inches and a 4-inch span. The base will be to small to work with the panel bracket # CE10300G because the panel bracket is designed to work with 4-inch rollers. The inside width of the panel bracket # CE10300G is 4-1/4 inches. I included a diagram of the Yates rubber Y-style bow stop # YR4Y22-3 for you as well. An option that may work is the CE Smith side angle mounting brackets # CE10211G. The L-shape brackets can take a 1/2...
view full answer...
- Mounting Methods for UWS Underbody Aluminum Trailer Toolbox UWS04012The UWS Underbody Aluminum Trailer Toolbox # UWS04012 does not include any mounting hardware since it is a general-purpose product. So you'll determine the best installation method for your preferred mounting point on your specific trailer. The amount of weight you'll load into it should be taken into account as you determine the mounting location and method of attachment. The box itself weighs about 50-lbs. You might use L-brackets like # CE10211G, if you don't mind drilling into the...
view full answer...
- Installation Bracket and Shaft for Boat Trailer Guide-On Roller DL21556To mount the Dutton-Lainson Boat Trailer Guide-On Roller # DL21556 you can use the 1/2-inch-diameter roller shaft # CE10705A (which includes the pal nuts) and the Side Angle Mounting Bracket kit # CE10211G. You will want to locally source suitable-length galvanized hardware for installing the brackets.
view full answer... - Dimensions of CE Smith Side Angle Galvanized Mounting BracketThe CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair # CE10211G have holes that are 2-1/4 inches on center and 1-1/4 inches on center in the other direction. I've attached a photo to assist as well as a photo with other dimensions to assist.
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
David L
Updated by:
Wilson B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vicki J.
8/18/2017
This is a great product and works very well for my husbands kayak trailer!